Motorola GT10 - Manual (Page 137)

GT10/GT30 6.3 Entering Configuration Settings from the GT30
114
6.3.8 Inhibiting the System Menu Display
In order to prevent unauthorized persons from being able to change GT30 configuration
settings, the GT30 is set up so that DIP switches can be used to make it impossible to
display the system menu.
Switch no. Function OFF ON
1 Usage inhibited Should always be in the “OFF”
position when unit is used.
2 Inhibits system menu
shift Shift possible Shift inhibited
3 Usage inhibited Should always be in the “OFF”
4
position when unit is used.
ON
OFF
4 3
MODE
1 2
Operation mode setting switches
If the second operation mode setting switch is
turned on, as shown at the left, access to the
system menu is denied.