Motorola GT10 - Manual (Page 123)

GT10/GT30 6.2 Entering Configuration Settings with GTWIN
100
“Auto–Paging” screen
Auto–paging
This is used to specify the “Auto–paging function”, which automatically switches the
specified screen when a given period of time has elapsed.
Off ––– The screen is not switched automatically.
On ––– The screen is switched automatically, in conformance with the specified
contents.
Auto–paging settings
If “On” is selected for auto–paging, and the [Setup] button is clicked, a dialog box
containing the following auto–paging settings is displayed.
Clicking on the button for “Screen No.”, “Time”, or “Jump to” displays a “Value Set”
dialog box. Set the value and click the [Save] button to save values one at a time.
Screen No. ––– This specifies the screen targeted for auto–paging.
Time ––– This specifies the time for which the screen specified above is displayed. The
setting range is from 1 to 255 seconds.
Jump to ––– This specifies the number of the next screen to be displayed.
[Return] ––– This completes the auto–paging settings and returns to the
“Auto–Paging” dialog box.