Motorola cellular phone - Manual (Page 22)

NS (No Service) LED above the Signal Strength
Indicator will flash. This indicates that you are
currently in an area where you cannot make or
receive cellular phone calls.
When the display is on, all LEDs will light. When the
display goes blank to save power, one LED will flash
at a time up to the level of signal strength received.
The Battery Level Indicator (BLI) represents the
current strength of the battery being used. You can
use this to estimate the amount of battery capacity
remaining. The BLI is displayed as a three-level bar
graph following the battery symbol in the lower left of
the display. To view after display blanks, press any
key or open the flip.
Variables such as temperature, battery age, and
charging conditions may affect battery level.
12 3 4 5 67
12 3 4 5 67
Battery Level Indicator
22
Basic
Operation