Motorola cellular phone - Manual (Page 104)

System Type Selection Display
Standard Mode
Your phone first seeks a home type system, then
a non-home type.
If home system is non-wireline (type A)
If home system is wireline (type B)
Reversed Preference Mode
Your phone first seeks a non-home type system,
then a home type. (Select this mode if in a fringe
area of your home system or in certain roaming
situations.)
If home system is non-wireline (type A)
Fast flashing
Rm = call on B system
Slow flashing Rm = call on home type system
Slow flashing IU = call in progress
If home system is wireline (type B)
Fast flashing
Rm = call on A system
Slow flashing Rm = call on home type system
Slow flashing IU = call in progress
Home Only Mode
Phone will not operate outside its home system.
Scan A Mode
Phone will operate only within non-wireline (A)
systems.
Scan B Mode
Phone will operate only within wireline (B) systems.
Preferred System ID Mode (Pref’d SIDs)
Phone operates only within specifically identified
systems. This requires entry of up to fifteen System
ID numbers for those systems over which you
wish to operate. The SID digits are entered as
obtained from your Cellular Service Provider.
Std A B
Std B A
Scan B A
Scan A B
Home
Scan A
Scan B
Pref’d
SIDs
104
Advanced
Information
¸
Phone Options