Keyboard features screen – Gateway ALR 8300 User Manual
Page 77
BIOS Setup 65
•
Base I/O Address: displays the base I/O address for the
parallel port. Use the “+” or “-” key to display the optional
addresses available.
•
Interrupt: displays the current interrupt for the parallel port.
Use the “+” or “-” key to display the optional interrupts
available.
•
DMA Channel: displays the current DMA channel used by
the parallel port. Use the “+” or “-” key to display the optional
DMA channels available.
•
Floppy Disk Controller: this field controls the integrated diskette
drive controller. The options include
Enable
and
Disable
.
•
Base I/O Address: sets the base I/O address used by the
controller. The options include
Primary
and
Secondary
.
Keyboard features screen
This screen allows you to configure the features of the keyboard.
Figure 34: Keyboard Features Screen
•
Num Lock: sets the power-on state of the
N
UMLOCK
key. The
options include
Auto, On,
and
Off
.
4081TL.book Page 65 Tuesday, December 22, 1998 1:27 PM