Gateway ALR 8300 - Manual (Page 70)

58 Maintaining and Troubleshooting the Gateway ALR 8300 Server
• ATAPI Removable - Select this option if the drive is an
ATAPI removable disk drive.
• None - “Auto” has been unable to supply the drive type or
select “None” to disable any drive installed.
• Multi-Sector Transfers: enabling this option allows multiple
sector data transfers on compatible drives. The options are
DISABLED, STANDARD, 2 SECTORS, 4 SECTORS, 8
SECTORS,
and 16 SECTORS .
• LBA Mode Control: enabling this option causes Logical Block
Addressing to be used in place of Cylinders, Heads and Sectors.
The options are
ENABLED and DISABLED .
• 32 Bit I/O: enabling this option allows 32-bit communication
between the processor and the IDE controller. The options are
ENABLED and DISABLED .
• Transfer Mode: selects the method for moving data to and from
the drive. The options listed are those supported by the drive and
the platform; either
STANDARD, FAST PIO 1, FAST PIO 2, FAST
PIO 3, and FAST PIO 4 ; or STANDARD, FAST DMA A, FAST
DMA B , and FAST DMA F .
• Ultra DMA Mode: enabling this option allows a faster data
transfer rate with compatible drives. The options are
ENABLED
and DISABLED .
4081TL.book Page 58 Tuesday, December 22, 1998 1:27 PM