Gateway ALR 8300 - Manual (Page 43)

Installing Components 31
4. Align the new Pentium II SEC cartridge in the Slot 2 supports and
press it firmly into place until fully seated. See Figure 13.
Figure 13: Installing the New Processor
5. Place the lock bar over the top of the processor cartridge and secure it
in place with the two screws provided.
6. Set the jumpers correctly for the new processor configuration.
7. Insert the new VRM into the connector provided until the release
latches click into place.
8. Close the case, as described in “Closing the system” on page 7.
9. Reconnect the power cord and turn on the system.
4081TL.book Page 31 Tuesday, December 22, 1998 1:27 PM