beautypg.com

Reinstalling the side panel – Gateway ALR 8300 User Manual

Page 21

background image

System Access 9

2.

Lower the panel and anchor its top edge to the chassis.

3.

Gently release the panel so that its side is flush against the chassis.

4.

Slide the panel forward until it is locked into place.

5.

Secure the panel with the screws you removed when you removed the
wrap-around panel.

Reinstalling the side panel

You must replace the bezel and the wrap-around panel before you replace
the side panel.

1.

Align the panel with the chassis ledges just a few inches towards the
back of the chassis. (See Figure 6.)

Figure 6: Reinstalling the Side Panel

To Replace the Side Panel

Important!

-J XLI '137 LEW FIIR

GSVVYTXIH F] E TS[IV

SYXEKI ERH ]SY TPYK XLI

W]WXIQ MRXS E TS[IV SYXPIX MX

[MPP TS[IV YT MQQIHMEXIP]

8LMW MW RSVQEP

4081TL.book Page 9 Tuesday, December 22, 1998 1:27 PM