FUJITSU BX900 S1 - Manual (Page 96)

96 Operating Manual BX900 S1
Hot-plug components
©
c
o gn
itas
. G
es
el
ls
ch
ft f
ür
T
ec
h
ni
k-
Do
ku
m
en
tat
io
n
m
bH
2
01
1
P
fa
d:
C
:\P
rogr
am
m
e \F
CT
\t im
_ap
p\
tim
_l
oc
al
\w
ork
\W
A
LT
E
R
\O
B
J_
DO
K U
-4
95
3-0
07
.fm
8.2.2.1 Connection blade stacking
Up to 8 Connection Blades GbE Switch/IBP 36/8+2 can be switched together to
form a so-called stack. One of the connection blades takes on the role of the
master. This connection blade is used to administer all modules of the stack. All
modules of a stack act as one connection blade. In this way, connection blade
stacking offers a large number of ports with minimum administrative effort.
The connections within a stack are established through the stacking ports of the
connection blades. The internal stacking ports to the midplane of the BX900 S1
system unit are each used to connect two connection blades that are installed
in the same fabric, i.e. in two adjacent slots. Connection blades in different
fabrics are connected through the external ports using CX4 cables.
7 (LINK) LAN connection indicator (green)
Lit: SFP+ transceiver connection available
Flashes: SFP+ transceiver connection active
Dark: SFP+ transceiver connection not available or
deactivated.
C 1-Gbit Ethernet ports (RJ45 with two integrated LAN status LEDs each)
5 LAN transfer rate (green/orange)
Lights up
orange: LAN transfer rate 1 Gbit/s
Lights up green: LAN transfer rate 100 Mbit/s
Dark: LAN transfer rate 10 Mbit/s
6 LAN connection indicator (green)
Lit: LAN connection available
Flashes: LAN connection active
Dark: LAN connection unavailable or deactivated