FUJITSU BX900 S1 - Manual (Page 125)

BX900 S1 Operating Manual 125
Hot-plug components
Figure 49: Installing a double-width connection blade
Ê Open the release lever (1) of the connection blade and push it carefully into
the empty fabric.
Figure 50: Locking a double-width connection blade
Ê Push the connection blade into the fabric as far as it will go.
Ê Push the release lever in the direction of the arrow until it clicks into place.
Removal is carried out in reverse order.
V
CAUTION!
If you remove a double-width connection blade and do not replace it with
a new one, you must install the separating clip (see
page 124 ) and two
dummy modules in the empty slot, see page 121 .
1