FUJITSU BX900 S1 User Manual
Page 73
BX900 S1
Operating Manual
73
Installation and operation
PIN
Contains a four-digit PIN as password protection for the
ServerView local service panel
Default values:
– PIN enable (OFF)
– PIN (0000)
Check
Ekeying Check: This is a function which allows you to query the
compatibility of the modules before startup, and then activate,
partially activate or deactivate the module depending on the
result. For example, you would not activate modules whose
operating voltages or power consumption are not compatible with
the system.
This test begins automatically after switch-on or after a hardware
replacement. If errors are found, you can find out more about
them via the Details button. Replace the defective hardware
component and repeat the test.
Save
Clicking the Save button saves and applies the settings in the
management blade.
With the Previous button you can go back and change
parameters. You save the changed configuration with the Save
button.
Export
Stored settings can be saved on a USB storage medium. In the
next menu you can specify which configuration data you want to
save to the USB storage medium.
You can export the following parameters:
– Language
– Identification
– Network
– PIN
– Power