Fostex PD-6 - Manual (Page 99)

97
PD-6 DVD Location Recorder (Chapter 7: Setup mode)
flashing
Option Comment
Off (default)
Option Comment
On
flashing
Off
Option Comment
1 to 9 minutes
When the remaining recording time of a disk gets under the specified time,
the error tone is not generated.
When the remaining recording time of a disk gets under the specified time,
the error tone is generated. (default setting is 3 minutes)
The time can be set in 1 minute steps.
Battery warning setting (BATT warning)
The “BATT warning” menu sets the threshold of the battery power voltage for
automatically ending recording or playback, releasing the disk lock or generating
the error tone while the PD-6 is running with the internal battery.
To generate the error tone when the battery power voltage drops below the threshold,
the “BATT warning” item in the “Error tone” menu must be set to “On”.
With the “BATT warning” menu, you can set the threshold between 10.5 V and 13.0
V.
10.5 V to 13.0 V
(default: 10.5 V)
You can set the voltage in 0.5 V steps.
The following settings are recommended depending on the battery used.
10.5 V: When a NiCd battery is used.
12.5 V: When a Lithium ion battery is used.
If the actual voltage lowers the voltage set by the “BATT warning” item for more
then one minute, the recorder automatically stops recording or playback, and
releases the disk lock.
Speaker mute on/off setting (Speaker mute)
The “Speaker mute” menu selects whether muting the internal monitor speaker or
not.
With the “BATT warning” menu, you can select “On” or “Off” for the monitor speaker
mute.
The monitor speaker is not muted.
The monitor speaker is muted except during playback.