Fostex PD-6 - Manual (Page 64)

62
PD-6 DVD Location Recorder (Chapter 5: Recording/playback)
2TR
4TR
5TR
6TR
2+4TR
1+5TR
[REC TR] select switch
Selecting recording tracks
According to the situation, select the recording track mode from among the
following using the [REC TR] select switch. Depending on the selected mode,
the level meter section on the display is shown differently (except a “Tape”
mode disk).
You can record to a stereo-track file.
You can record to a four-track file.
You can record to a five-track file.
You can record to a six-track file.
You can record to a two-track file and a four-track file simultaneously.
For example, you can record sources directly to the four-track file and a rough stereo
mix to the two-track file.
You can record to a mono-track file and a five-track file simultaneously.
For example, you can record sources directly to the five-track file and a rough mono
mix to the a mono-track file.
• When playing back each individual file recorded in the “2+4TR” or “1+5TR”
mode, the audio fed from the [ANALOG LINE OUT] connectors differs depending
on the [REC TR] switch position. See “Playback” on page 78 for details.
• When making recording to a “Tape” mode disk, the [REC TR] switch setting is
not needed. The recording track mode is determined by the [REC TR] switch
setting when the disk has been formatted. See “Format menu” on page 115 for
details.