Fostex PD-6 - Manual (Page 121)

119
PD-6 DVD Location Recorder (Chapter 8: Utility mode)
Selecting the record protection on or off [Rec protect]
Using the “Rec protect” menu, you can select “On” or “Off” of the recording
protection (record prohibit) for the currently loaded audio file.
1. Select the “Rec protect: ***” menu and press the [ENTER] key.
The current option (“On” or “Off”) flashes (the default is “Off”).
If you enter the Utility mode when no file is available on the current disk,
“Rec protec—” is shown instead of “Rec protect: Off (or On)”. This means
there is no audio file to which the “Rec protection” setting is applied. If you
select it and press the [ENTER] key in this case, “Void!” is shown.
2. Use the [SEL] dial to select “On” or “Off”, and press the [ENTER] key to confirm
the setting.
3. Press the [EXIT] key to exit the Utility mode.
On the Normal screen, a record protected audio file has the “key” icon
beside the file name, as show below.
flashing