Fostex PD-6 - Manual (Page 47)

45
PD-6 DVD Location Recorder (Chapter 3: Names and functions)
2TR mode 4TR mode 5TR mode 6TR mode 2+4TR mode 1+5TR mode
• Level meter section
Depending on the [REC TR] select switch setting, the level meter section on the screen
looks like the following.
• Setup mode screen
Pressing the [SETUP/UTILITY] key (while unSHIFTed) brings up the primary page of
the Setup mode screen. Using Setup mode menus, you can set preferences, etc. of the
PD-6. See “Chapter 7: Setup mode” on page 87 for details about the Setup mode.
• Utility mode screen
Pressing the [SETUP/UTILITY] key while SHIFTed brings up the primary page of the
Utility mode screen. Using Utility mode menus, you can make settings related with
DVD-RAM disks to be used with the PD-6, as well as format a disk.
See “Chapter 8: Utility mode” on page 105 for details about the Utility mode.
• TC Setup mode screen
Pressing the [CONTRAST/TC SETUP] key while SHIFTed brings up the primary page
of the TC Setup mode screen. Using the TC Setup mode menus you can make
preferences/settings related with time code recording/playback.
See “Chapter 6: TC Setup mode” on page 81 for details about the TC Setup mode.
With a “Tape” mode file, the level meter section looks the same regardless of the
[REC TR] select switch setting.