Fostex PD-6 - Manual (Page 128)

126
PD-6 DVD Location Recorder (Chapter 9: EDL SEL mode )
Sample FRQ
TAPE
TC frame
Drop frame
44kHz, 48kHz, 88kHz, 96kHz, 176kHz and 192kHz
Up to 5 desired characters for a reel number (TAPE)
23.97, 30, 24, 29.97 and 25
On and Off (default)
Menu Options
5. While “Video format” is highlighted, press the [ENTER] key.
The display changes to show the screen on which you can select the video
format. The current option flashes (default: PAL).
6. Use the [SEL] dial to select the video format, and press the [ENTER] key to
confirm the setting.
You can select the video format from among “PAL”, “NTSC” and “SECAM”.
In the same manner as above, set the following menus.
“Sample FREQ” -> “TAPE” -> “TC frame” -> “Drop frame”
The following table shows the options for each menu setting.
The default setting for each menu except the “Drop frame” menu reflects
the setting of the audio file loaded before bringing up the ALE screen.
• If you set the “TC frame” menu to “29.97”, set the “Drop frame” menu
to “On”.
• You can use the [SEL] dial (or the numeric keys) to enter “TAPE” (reel
number). Use the [ SKIP/CURSOR ] key to move the cursor.
When using the numeric keys for entering characters, pressing any other
numeric key moves the cursor to the right automatically.
7. After making necessary settings, press the [EXIT] key.
The display change to show the screen which asks you whether making a new
ALE file or not and “Are you sure?” flashes.
To cancel creating a file list, press the [EXIT] key at this stage.
flashing
flashing