Fostex PD-6 - Manual (Page 11)

9
PD-6 DVD Location Recorder
Precautions on installation
• Do not install the unit in the following conditions
- in a extremely hot or cold place
- in a moist place
- in a dusty place
- in a strong magnetic field or near a device which generates a magnetic field
- in the direct sunshine
• Notes on waterproof
The panels of the unit are designed to prevent waterdrops from entering
inside, however, the unit is not perfectly waterproofed. So do not use the
unit in an extremely moist place or in a circumstance where the unit catches
the rain or spray directly.
• Notes on moisture condensation
When you bring the unit from a cold place to a warm place, moisture may
condense on the drive, display, panels, etc. In such a case, leave the unit for
a while until it warms up and evaporates any moisture.
Equipment name, electrical ratings, serial
number and other information for the PD-6,
are written on bottom side.
MODEL PD-6
DVD LOCATION RECORDER
FOSTEX CO.
INPUT: 12VDC
SERIAL NO.
MADE IN JAPAN
• Do not let water or other liquid, or metal objects such as pins, accidentally
enter the inside of the unit because this may lead to electric shock or
damage. Should water enter the inside of the unit, turn off the power,
unplug the power cord from the AC adaptor and remove the battery, and
consult your dealer or the nearest FOSTEX service station.
• Do not drop the unit or give it a strong shock. The internal circuits,
display, panels may be damaged. Although the unit is designed to be used
outside, handle the unit with great care because it is a precision machine.
• When using the supplied carrying belt, to prevent the unit from dropping
accidentally, make sure that it is attatched to the unit correctly.
• Do not give a strong shock to the LCD display. The liquid used inside the
LCD display is toxic. If the liquid is spilled, do not suck it in. If it is stained
to your hand or skin, wash immediately with plenty of water.
• Clean with a soft dry cloth.
Never use solvents such as benzine or thinner to clean the PD-6.
Wipe it clean with a soft dry cloth. If further cleaning is required, a lightly
moistened cloth with a mild detergent may be used.