Fostex PD-6 - Manual (Page 100)

98
PD-6 DVD Location Recorder (Chapter 7: Setup mode)
Mono
Option Comment
1-2
1-6
-12dB
Option Comment
-6dB
1: 3
Option Comment
1: 5
Limiter parameter setting (Limiter parameter)
The “Limiter parameter” menu makes parameter setting for the limiter.
On “Limiter parameter” menu screen, you can set “Grouping”, “Threshold” and “Ratio”
parameters.
The limiter works for each channel independently. (default)
Channels 1 and 2 are grouped, and the limiter works the same for channels
1 and 2 according to the input levels of channels 1 and 2.
Channels 1 through 6 are grouped, and the limiter works the same for
channels 1 and 6 according to the input levels of channels 1 through 6.
<“Grouping”>
Even if the [LIMITER] switch of a channel in the group is set to “OFF”, the input
level of the channel is checked by the limiter. Therefore, do not feed any audio
signal to the unused channel in the group to prevent a malfunction of the
limiter.
The threshold is set to -12 dB. (default)
The threshold is set to -6 dB.
The ratio is set to 1:3. (default)
The ratio is set to 1:5.