Fostex PD-6 - Manual (Page 13)

11
PD-6 DVD Location Recorder
Real Time Clock menu Check or edit the internal realtime clock.
Digital Out menu Select the digital output signal format between AES/EBU and SPDIF.
Digital In menu For switching the input channel sources between digital and analog.
Skip mode menu You can select the function of the [SKIP/CURSOR] key.
Diagnoses menu Use this menu to select whether or not to log errors during recording
to the diagnosis file.
Reference level menu Select the PD-6 reference input level.
Peak hold time menu You can set the peak hold time of the level meters.
Tone rec mode menu For setting recording duration and mode of the slate tone.
Auto cue menu You can select whether automatically recording a cue point or not at
the record start position.
Pause time menu You can set the pause cancel time.
Error tone menu Select error tone on or off.
Speaker mute menu You can select whether muting the monitor speaker or not except
during recording.
Limiter parameter menu Set the limiter parameters here.
Default File name menu You can select the name form of an audio file, when it is created
between date information base and scene/take number information
base.
Default track name menu Use this menu to specify the default track name of audio files.
Next event menu You can set the event number of audio files.
USB keyboard menu Use this menu to select the USB keyboard type to be connected
between US and JAPAN.
User setup save menu Sets up data to the user box.
User setup load menu Go here to load the setup data from the user box.
Pre rec time menu You can set the pre-record time of audio pooled in the buffer.
Version menu This menu is for checking the PD-5 software version.
BATT warning menu For setting the threshold of the battery power voltage for generating
the error tone.
Chapter 7: Setup mode
This chapter details the Setup mode. By using the Setup mode menus, you can
set preferences, etc. for the PD-6. The following menus are available in the
Setup mode:
Setup mode menus may change when the PD-6 software is periodically updated.
Chapter 8: Utility mode
This chapter describes the Utility mode, in which you can make settings related
to the DVD-RAM disks to be used with the PD-6, as well as to format a disk.
The following menus are available in the Utility mode.
The Utility mode menu may change as the PD-6 software is updated.