FUJITSU M3099EX/EH - Manual (Page 56)

3-28 M3099EX/EH OEM Manual
Control register A#2
Control register B#2
X’00' is set when power is turned on or when a CLEAR command
issued for initialization.
b7 b0
*2: Dithered or Error diffusion are selected by control register #19.
000:
001:
010:
011:
100:
101:
110:
111:
Dither pattern No. specification
Built-in/Download
0: Built-in
1: Download
A#2
B#2
0 0
Specifies halftone
0
×
: Set from the operator panel
10: Not dithered
11: Dithered or Error diffusion (*2)
• When the built-in pattern is used, the density information shown in the
control register #1 is valid.
• Four patterns (000 to 011) are valid when the built-in pattern is selected.
• When the download pattern is used, the density information shown in
control register #1 is invalid.
• Eight patterns (000 to 111) is valid when the download pattern is
*1:
(*1)