FUJITSU M3099EX/EH - Manual (Page 134)

4-4 M3099EX/EH OEM Manual
Button name Function
Table 4.1 Button functions
Start
Stop
Duplex
Front/Back
Size
Density
Resolution
Manual
Landscape
Halftone
When the Ready lamp is lit in the manual start mode,
pressing this button starts a reading operation.
Pressed during reading
The reading operation immediately stops and the
document under transport is ejected to the stacker.
A picked document if any is ejected to the stacker.
The hopper table is lowered to the bottom.
Pressed during setting of the reading mode
The display returns to the initial screen.
Pressed during waiting for Hopper Timer
The Hopper table is lowered to the bottom.
Pressed during displaying the initial screen
The abrasion counter is displayed.
Pressed during occuring the temporary error.
The temporary error is recovered.
Toggles the LCD screen between simplex and
duplex reading .
Toggles the LCD screen between front-side and
back-side for reading.
Sets the document size.
Sets the scanning density.
Sets the scanning resolution.
Sets the manual mode.
Pressing this button lifts the hopper table to the level for
manual mode. Pressing the button again releases the
mode and lowers the hopper table to the bottom.
Sets the document scan direction to the portrait or
landscape mode.
Sets whether to execute halftone processing (dither
or error diffusion) and also automatic separation
processing (dither or error diffusion if the image
processing option is installed).