FUJITSU M3099EX/EH - Manual (Page 157)

M3099EX/EH OEM Manual 4-27
BASIC
OPERATION
3 Adjust the stacker table to
the document size.
Note:
Extend the stacker table and
extension for long
documents. Stand and
extend the stopper up and
also turn the lever in the
stacker down for short
documents.
If the scanner is 500 sheets
hopper type, extend the
stacker table for long
documents. And also use
stopper for small
documents.
Load a document about
20 mm a part from the
stopper.
Line mark
Document
Hopper table
Extension
Stopper
Document
about 20 mm
2 Load a document read side
face-up on the hopper table.
Note:
1. Be sure not to load
documents higher than the
line marked inside the guide
on each side of the hopper
table.
2. If the documents are too
long, pull out the extension
at the front of the hopper.
Stopper
Document
Stacker
table
Stacker
Lever