Resolving the incorrect image darkness problems – FARGO electronic FARGO DTC 400 User Manual

Page 99

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400 Card Printer/Encoder User Guide (Rev. 2.6)

4-42

Resolving the Incorrect Image Darkness problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.

Step Procedure

Review the following information.

• Symptom: Printed cards are too dark or too light.

• Printer Error State: None

• LCD Error Display: None

• Driver Monitor Error Display: None

Run a self-test to ensure that the issue is not with the Driver settings.

3 Adjust

the

Dye-Sub Intensity setting within the Image Color tab of the Printer

Driver. See

procedure.