Accessing the ip address of your printer, Accessing the dtc400 ip address, Accessing the ip address of your printer -55 – FARGO electronic FARGO DTC 400 User Manual
Page 166: Accessing the dtc400 ip address -55
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
5-55
Accessing the IP address of your Printer
The additional LCD menus for Ethernet-enabled Printers are provided to view the IP address
of the Printer. Follow these procedures to access the IP Address of your Printer model.
Accessing the DTC400 IP address
Step Procedure
1
Apply power to the Printer.
2
Ensure that the Printer is connected to your network.
3
Wait up to one (1) minute to allow the Printer to configure the IP address.
4
Scroll through the informational messages on the LCD by selecting the INFO
button (the button on the right of the front panel).
5
View the IP address displayed as a dotted quad number.
Example: 168.192.1.1