FARGO electronic FARGO DTC 400 User Manual
Page 164
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
5-53
Upgrading the Main Firmware with the Fargo Workbench Printer Utility
(continued)
Step Procedure
3
Access the Upgrade Firmware window from the Actions Menu, as shown
below.
4
Select the New Firmware File by clicking Browse and selecting the Firmware
file from the appropriate folder.
5
Begin the upgrade by clicking Upgrade, as shown below.
Refer to the Fargo Workbench Printer Utility User Guide at this time.