FARGO electronic FARGO DTC 400 - Manual (Page 180)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 6-2
DTC400 Print Driver Options
The options are provided in this section.
Using the Card tab (DTC400)
Adjusting the Card Size Option
Step Description
1 Click inches or mm to choose the desired unit of measurement.
(Note No.1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-80
card.)
(Note No.2: The Card Size indicates that the Printer accepts standard,
"credit card" size CR-80 (ISO ID-1) cards. The dimensions of the total print
area for this card size appear in the Print Width and Print Length boxes.)