Upgrading the print server, Upgrading the print server -44 – FARGO electronic FARGO DTC 400 User Manual
Page 155
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
5-44
Upgrading the Print Server
This procedure provides a means to upgrade the Firmware in the Printer Server not the main
Printer.
Step Procedure
1 Select
the
Administration link.
2
Log in as a root User (using the password) if you are so prompted. (Note: Any
change of setting will only be accepted after you have successfully logged in.)
3 Select
the
Upgrade link.
4 Select
the
Browse button.
5
Navigate to and select the appropriate file to upload.