FARGO electronic FARGO DTC 400 - Manual (Page 290)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 12-1
Section 12: Firmware Updates
The purpose of this section is to provide the User with information on the internal software or
Firmware, which controls all aspects of the Printer's operation. New Firmware versions may
be released containing enhancements, such as improved reliability, added features or better
print quality. New Firmware updates can be downloaded from the Internet.
•
Refer to the Fargo Workbench Printer Utility User Guide to download and install
Firmware updates. See the Fargo website to access this document.
•
Important: This is a new Printer. Once new Firmware is released and made available
(via Step 2 below), Steps 3 through 14 in this procedure will enlarged with “real world”
populated windows and dialogs. Until that time, please review this procedure only for
future use.
Performing the Firmware Updates
Step Procedure
2 Type in: www.fargosupport.com to bring up the web site, as shown below.
Display A – Card tab (Diagnostics button)