FARGO electronic FARGO DTC 400 - Manual (Page 79)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6) 4-22
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printer will not print.
• Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark
• LCD Error Display: Ribbon Out
• Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon Cartridge
a. Press on the Resume button.