Fortinet FortiGate 100 - Manual (Page 44)

44
Fortinet Inc.
Advanced NAT/Route mode settings NAT/Route mode installation
Advanced NAT/Route mode settings
Use Table 11 to gather the information that you need to customize advanced
FortiGate NAT/Route mode settings.
DMZ interface
Use Table 12 to record the IP address and netmask of the FortiGate DMZ interface if
you are configuring it during installation.
.
Table 11: Advanced FortiGate NAT/Route mode settings
External
interface
DHCP:
If your Internet Service Provider (ISP) supplies you with
an IP address using DHCP, no further information is
required.
PPPoE:
User name:
Password:
If your ISP supplies you with an IP address using PPPoE, record your
PPPoE user name and password.
DHCP server
Starting IP:
_____._____._____._____
Ending IP:
_____._____._____._____
Netmask:
_____._____._____._____
Default Route:
_____._____._____._____
DNS IP:
_____._____._____._____
The FortiGate unit contains a DHCP server that you can configure to
automatically set the addresses of the computers on your internal network.
Table 12: DMZ interface (Optional)
DMZ IP:
_____._____._____._____
Netmask:
_____._____._____._____