Configuring radius support, Adding radius servers, Deleting radius servers – Fortinet FortiGate 100 User Manual
Page 176: Adding radius servers deleting radius servers
176
Fortinet Inc.
Adding RADIUS servers
Users and authentication
Configuring RADIUS support
If you have configured RADIUS support and a user is required to authenticate using a
RADIUS server, the FortiGate unit contacts the RADIUS server for authentication.
This section describes:
•
•
Adding RADIUS servers
To configure the FortiGate unit for RADIUS authentication:
1
Go to User > RADIUS.
2
Select New to add a new RADIUS server.
3
Enter the name of the RADIUS server.
You can enter any name. The name can contain numbers (0-9), uppercase and
lowercase letters (A-Z, a-z), and the special characters - and _. Other special
characters and spaces are not allowed.
4
Enter the domain name or IP address of the RADIUS server.
5
Enter the RADIUS server secret.
6
Select OK.
Figure 18: Example RADIUS configuration
Deleting RADIUS servers
You cannot delete RADIUS servers that have been added to user groups.
1
Go to User > RADIUS.
2
Select Delete
beside the RADIUS server name that you want to delete.
3
Select OK.