Configuring a pptp dialup connection, Connecting to the pptp vpn, Configuring a windows 2000 client for pptp – Fortinet FortiGate 100 User Manual
Page 211
PPTP and L2TP VPN
Configuring a Windows 2000 client for PPTP
FortiGate-100 Installation and Configuration Guide
211
8
Insert diskettes or CDs as required.
9
Restart the computer.
Configuring a PPTP dialup connection
1
Go to My Computer > Dial-Up Networking > Configuration.
2
Double-click Make New Connection.
3
Name the connection and select Next.
4
Enter the IP address or host name of the FortiGate unit to connect to and select Next.
5
Select Finish.
An icon for the new connection appears in the Dial-Up Networking folder.
6
Right-click the new icon and select Properties.
7
Go to Server Types.
8
Uncheck IPX/SPX Compatible.
9
Select TCP/IP Settings.
10
Uncheck Use IP header compression.
11
Uncheck Use default gateway on remote network.
12
Select OK twice.
Connecting to the PPTP VPN
1
Start the dialup connection that you configured in the previous procedure.
2
Enter your PPTP VPN User Name and Password.
3
Select Connect.
Configuring a Windows 2000 client for PPTP
Use the following procedure to configure a client computer running Windows 2000 so
that it can connect to a FortiGate PPTP VPN.
Configuring a PPTP dialup connection
1
Go to Start > Settings > Network and Dial-up Connections.
2
Double-click Make New Connection to start the Network Connection Wizard and
select Next.
3
For Network Connection Type, select Connect to a private network through the
Internet and select Next.
4
For Destination Address, enter the IP address or host name of the FortiGate unit to
connect to and select Next.
5
Set Connection Availability to Only for myself and select Next.
6
Select Finish.
7
In the Connect window, select Properties.
8
Select the Security tab.