FUJITSU M304X - Manual (Page 96)

6.5 Commands
detecting one of the control sequences listed in Table 6.5, the printer
regards it as a command and starts the operation.
Table 6.5 Commands and their control
name
Load FCB
Pitch
Set to Initial Stare
Skip to Channel-n
Move Horizontal Position
Space n-lines
Load Horizontal Tab Stop Data
status
status Response
Half Line Feed
Repeat Character
sequence
7-bit mode mode
23 90 23 9C
20 47 20 47
63
50 22 90 22
61 61
65 65
20 20 4E
70 70
50 24 90 24 9c
4B
62 62
Note: P indicates a parameter, and PS indicates a parameter
sequence. For their details, refer to the explanations of the
commands listed in the table above.
Load FCB Data command
The Load FCB Data command loads forms control data into the forms
The forms control data is channel data. Channels 1 to 12 can be selected
for channel data.
6 21