FUJITSU M304X - Manual (Page 105)

T a b l e 6 . 6 P r i n t e r s t a t u s c o n t i n u e d
status
code
Printer
Description
5 2 B O F channel 2 B O F = channel 2 5 3 B O F channel B O F = channel
5 4 B O F channel 1 2 B O F = channel 1 2
58 print band is the
printer.
5 9 The 64-character set print band is mounted the
printer.
6 0 96 BAND The set print band is mounted the
printer.
The set print band is mounted on the status
6 6 2K input buffer The printer interface buffer is bytes.
6 8 enabled The mode was enabled by setting.
6 9 New Line CR When the CR code is received, the function which
enabled converts it to CR LF becomes enabled.
7 0 New Line on right The new line on margin function is enabled.
margin enabled
Convert LF When the code is received, the which
enabled converts it the LF code is enabled.
7 2 Lower case
enabled
7 4 Stop on invalid When an invalid control code is received, error
control code occurs, and printer stops.
enabled
75 Substitute on When receiving an invalid control code,
invalid control converts it to the code specified by the setting.
code enabled
7 7 Stop on invalid This status code is the same manner as
sequence status 74.
enabled
Substitute on status code is the manner as chat of
invalid control 75.
sequence enabled
80 I on status code is the same manner as of
mission error 74.
enabled
8 1 Substitute on status code is the same manner as that of
transmission error status 75.
enabled
status
8 2 Even parity interface parity is eve".
enabled
8 3 Odd parity enabled The interface parity is odd.
6 30