FUJITSU M304X User Manual

Page 82

Text mode
Original mode

Table 6.1 RS-232-C interface signal lines

Continued

Signal name

Test

(TM)

Signal

Functions

If the host detects

the LL signal is

and

the local

rest is executable, it

this signal on
If the host turns

signal on in response

the LL signal being an, the host

does

not set

this signal off

the LL signal is

1 .

If this signal is

set to 0 within 2

after the printer

the LL on

the printer

terminates the local

and sets

the

LL off

The combinations of the RTS and CTS signals listed in Table 6.2 are provided

for the printer.

For the RTS and CTS setup, refer to

Guide.

Table 6.2 Operation by the RTS and CTS

setup

CTS

Function

Half-duplex

ENABLE

The printer

rhe

waifs

for

the CTS

mode

the

and transmits data

the

when the

ends, the

the

off

DISABL

The printer sets the

and

transmits

data

the

whether the

is 0

When transmission ends,

printer sets

off

Full-duplex

ENABLE

The printer keeps

0, and when the

is set

0, the

mode

printer transmits

The printer always keeps

0 and transmits data whether

is 0 or 1.

6 - 7