FUJITSU M304X - Manual (Page 7)

ILLUSTRATIONS
Figure 1.1 series line printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2
Figure 2.1
Figure 2.2
Figure 2.3
Figure
Figure 2.5
Figure 2.6
Figure 2.7
Figure 2.8
Figure 2.9
Figure 2.10
Figure 2.11
Figure 2.12
2.13
Figure 2.14
Figure 2.15
Figure 2.16
Figure 2.17
Figure 2.18
Figure 2.19
Outer dimensions (with the forms rack) ................... 2 - 4
Operation and maintenance area (with the forms rack) .... 2 - 5
Outer dimensions (with the powered stacker) .............. 2 - 7
Operation and maintenance areas (with the
powered stacker)
......................................... 2 - 8
FCT unit ................................................. 2 - 9
Paper puller ............................................. 2 10
Forms .................................................... 2 11
Curled ............................................. 2 11
Forms container lids ..................................... 2 12
Shape of the forms container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 12
Leftmost and rightmost print positions ................... 2 13
Dimensions relating to pin feed holes .................... 2 13
Protrusion and separation of the outer layer at the
perforation of multiple-part forms .......................
2 14
Methods of fastening paper ............................... 2 15
Allowable incorrect alignment of
forms ..... 2 16
Multi-part forms with layers of different ...... 2 17
Carbon paper covering pin feed holes ..................... 2 17
Self-adhesive forms ................................ 2 18
Specifications of FCT .................................... 2 20
Figure 3.1 Printer configuration .................................... 3 1
Figure 3.2 Control unit ............................................. 3 - 4
Figure 4.1
Figure 4.2
Figure 4.3
Figure 4.4
Figure 4.5
Figure 4.6
4.7
Figure 4.8
Figure 4.9
Figure 4.10
Figure 4.11
Figure 4.12
Basic operations ......................................... 4 - l
Print operation .......................................... 4 - 2
Basic data transfer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Timing of signals in data transfer .......................
4 - 5
DPC-compatible interface signal driver and ...... 4 6
DPC-compatible interface connector pin
................................................ 4 - 7
DPC-compatible interface connector pin assignment
(Winchester type) ........................................ 4 - 8
Timing of FCB data loading ............................... 4 12
Correspondence between FCB data channels and bits ........
4 13
Channels specified for a forms feed format ............... 4 15
An example of FCT and forms feed format .................. 4 17
An example of format specification from
the operator panel ....................................... 4 19
Figure 5.1 Basic operations ......................................... 5 - l
Figure 5.2 Character code transfer timing ........................... 5 5
Figure 5.3 Control code receive timing .............................. 5 - 5
Figure 5.4 DC1 code receive timing chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6
Figure 5.5 DC3 code receive timing .................................. 5 - 7
Figure 5.6 Skip-15-Lines command receive timing chart ............... 5 7
Figure 5.7 data receive timing chart ............................ 5 - 8
Figure 5.8 Centronics-compatible interface signal ... 5 9