FUJITSU M304X - Manual (Page 23)

2.5 Specification
Continuous fanfold forms, single copy or multiple copy, used for the
printers. The forms have pin feed holes evenly lined up on both sides and
horizontal perforations that run perpendicular to the feed direction.
See Figure 2.7.
Forms width
perforations
Pin feed hole
Vertical 0
I
perforations
length
- - A - - - - - - - - -
0 I
I
I - - - - - - - - - - A - -
0
Figure 2.7 Forms
selecting forms for this printer, the user conform to the following
forms specifications:
2.5.1 General note about forms
This section describes paper quality and shape of the forms container.
Paper quality
paper used for forms should be of good quality, opaque, not too elastic,
and suitable for printing.
The paper must also be from dirt,
wrinkles, and tears. Torn paper can cause printing trouble.
Curled forms es shown in Figure 2.8 will not be fed or stacked correctly
after printing. Do not use curled forms.
Perforations
Figure 2.8 Curled forms
2 11