FUJITSU M304X - Manual (Page 44)

Write Check
specifications
made by Winchester (Printer side)
made by Winchester (Cable side)
Figure 4.7 DPC-compatible interface connector pin assignment (Winchester type)
4.3 Character and Control Codes
Table 4.2 shows character and control codes. In the table, areas enclosed with
a bold faced line indicate control codes, whereas the other areas indicate
character codes (ASCII codes). The table shows character codes of mode.
In ‘i-bit mode, character codes to are available. Character codes
with an asterisk in the table vary with the print band for each country, as
in the lower table.
4 - 8