FUJITSU M304X - Manual (Page 103)

6.6 Printer Status
Table 6.6 lists printer status responses for the Status Request command the
reset condition of each status.
Table 6.6 Printer status
Printer Description
c o d e
1 Odd half space . The printer in 6 lpi mode performed, line Status
, feed function and the printing line is
inch 5112,
inches).
,
4 FUSE was
HMRCHK A hammer error occurred.
error) Call a Fujitsu customer engineer. Error
FAX The fan inside rhe printer Error
(Blower error)
1 0 F O R M Error
(Forms end)
me stacker is full of forms. Error
full)
1 1 JAM Forms jam occurred. Error
(Forms
1 2 RIBBON Ribbon jam occurred, or no ribbon has not been set
(Ribbon error)
1 3 or band cover was opened. Error
(Interlock)
me or band cover was opened during Error
(Interlock. error)
cop cover was opened. Error
1 4 The band speed is Error
(Band speed check)
1 5 SYNCH band synchronous
(Band sync. error)
1 6 . When band was operated, did nor rotate.
(Band error) . A band other than above error occurred. ,
1 9 nor correctly read. Error
error)
2 5 Not top of forms Channel 1 was in the Load FCB data. Error
2 8 printer tried execute the Skip Channel
(Channel selected, command, but the channel was not in the
but channel not
, loaded)
6 28