MOTU 828x 28x30 Audio Interface with ThunderTechnology - Manual (Page 94)

C U E M I X F X
94
FILE MENU
Saving and loading hardware presets
The 828x can store up to 16 presets in its on-board
memory. A preset includes all CueMix FX settings
for all mix busses, but it excludes global settings
like clock source and sample rate.
The Load Hardware Preset and Save Hardware
Preset commands in the CueMix FX file menu let
you name, save and load presets in the 828x.
Peak/hold time
In CueMix FX, a peak indicator is a line
(representing a virtual LED) displayed in a level
meter that indicates the maximum signal level
registered by the meter. The
Peak/hold time setting
(File menu) determines how long this indicator
remains visible before it disappears (or begins to
drop). To disable peak/hold indicators altogether,
choose Off from this sub-menu.
Mix1 Return Includes Computer
The Mix1 return includes computer File menu item
applies to other MOTU interfaces products and has
no effect on the 828x.
Hardware follows CueMix Stereo Settings
This File menu item applies to other MOTU
interfaces products and has no effect on the 828x.
Show meter in dock icon
This CueMix FX File menu item applies to other
MOTU interfaces and has no effect on the 828x.
EDIT MENU
Undo/Redo
CueMix FX supports multiple undo/redo. This
allows you to step backwards and forwards
through your actions in the software.
Copying & pasting (duplicating) entire mixes
To copy and paste the settings from one mix to
another:
1 Select the source mix (Figure 9-1) and choose
Copy from the Edit menu (or press Command-C).
2 Choose the destination mix and choose Paste
from the Edit menu (or press Command-V).
Clear Peaks
Choose Clear Peaks from the Edit menu to clear all
peak indicators in all CueMix FX meters.