MOTU 828x 28x30 Audio Interface with ThunderTechnology - Manual (Page 124)

A P P E N D I X B : A U D I O I / O R E F E R E N C E
124
Outputs at 1x sample rates
Outputs are always listed in the same order as
follows, when operating the 828x at 1x sample rates
(44.1 or 48 kHz):
Outputs at 2x sample rates
When operating the 828x at a 2x sample rate (88.2
or 96 kHz), outputs are listed as follows:
Outputs at 4x sample rates
When operating the 828x at a 4x sample rate (176.4
or 192 kHz), outputs are listed as follows:
Output
44.1 / 48 kHz Channels List
position Comment
Analog 8 1-8 -
Main outs 2 9-10 If the main outs are
assigned to mirror another
output pair (such as the
analog 1-2), they won’t be
listed separately.
Phones 2 11-12 If the phones are assigned
to mirror another output
pair (such as the main
outs), they won’t be listed
separately.
SPDIF 2 13-14 If the phones are mirror-
ing, then subtract 2. If the
main outs are mirroring,
subtract another 2.
Optical A 8 ADAT
2 TOSLink 15-22
15-16 -
Optical B 8 ADAT
2 TOSLink 23-30
17-18 These channel number
ranges assume that optical
A is operating with the
same format.
Output
88.2/ 96 kHz Channels List
position Comment
Analog 8 1-8 -
Main outs 2 9-10 If the main outs are
assigned to mirror
another output pair
(such as the analog
1-2), they won’t be
listed separately.
Phones Mirror only -- -
SPDIF 2 11-12 If the main outs are
mirroring, then sub-
tract 2.
Optical A 4 ADAT
2 TOSLink 13-16
13-14 -
Optical B 4 ADAT
2 TOSLink 17-20
15-16 These channel num-
ber ranges assume
that optical A is oper-
ating with the same
format.
Output
176.4/ 192 kHz Channels List
position Comment
Analog 8 1-8 -
Main outs 2 9-10 -
Phones Mirror only -- -
SPDIF Not available -- -
Optical A Not available -- -
Optical B Not available -- -