MOTU 828x 28x30 Audio Interface with ThunderTechnology - Manual (Page 71)

C U E M I X F X
71
channel-specific settings (channel strip, EQ and
dynamics), plus the global meter bridge and reverb
processor.
Global reverb processor
The 828x has a global reverb module (Figure 9-23
on page 89). Once it has been activated, you can
feed signals to the reverb processor from various
points in the 828x mix matrix via input sends, bus
sends and output sends. Stereo output from the
reverb processor can then be fed back to mix
busses or output pairs using reverb returns.
Other features
CueMix offers many additional features, discussed
in this chapter, such as talkback/listenback,
extensive metering, graphic editing of certain
effects parameters, and more.
Widening the CueMix FX window
To view more input faders at once, resize the
window.
Figure 9-1: CueMix FX is a virtual mixer that gives you control over the 828x’s on-board mixing features.
Tabs for inputs,
mix busses and
outputs
DSP
resources
meter
828x
inputs
Mix bus
master
fader
Tabs for channel strip settings,
including EQ and dynamics, as
well as global settings such as
the meter bridge and reverb
processor.
Monitoring/
talkback
section
Monitor
group
metering
Mic inputs Inputs split
into mono
channels
Inputs grouped as
stereo pairs
MIx bus
menu
Channel
settings Channel
focus
Grow
box
Channel
scroll
bar
Solo
light