Multichannel Systems Cardio2D Manual - Manual (Page 50)

Cardio2D Manual
46
When using more than one cycle you can click onto the arrow symbol for one additional
option: A highlighted parameter field appears to modulate the “Amplitude (%)” in relationship
to each circle of the signal. The window "Single Pattern" shows the imported pulse as overlay
plot. The lower window "Complete Stimulation Pattern" shows the combined sequence of all
stimulus pulses.
Tool Bar
The settings in this tool bar influence the complete sequence of the stimulus patterns.
Modulate the “Amplitude (%)” and the “Offset (mV)” of the complete pattern via up-down
boxes.
Clicking the "Loop" button enables you to infinitely repeat the defined stimulus pattern.
Load a previous created stimulus pattern, save or delete the pattern . When
using marker signals, you have to define which one of the Digital Out ports should show
the corresponding TTL signals. Select one of the marker ports from the drop down menu
and connect a TTL signal source to the port.
Download and start the created stimulus pattern via the "Download" icon . If downloading
is not necessary, the icon is not available . This way you have an optical feedback for the
download.