Multichannel Systems Cardio2D Manual - Manual (Page 108)

Cardio2D Manual
104
Important: Please pay attention to the "Analyze" dialog. To use the heartbeat average tool,
you have to enable the check box in the "HB Averager" tab of the "Analyze" dialog in main
menu "Tools".
MEA Electrode Field
Recorded data traces are displayed in the MEA electrode field. To adapt the y-axis, please use
the drop down menu. The MEA electrode field shows the averaged heartbeats of all channels of
the currently selected recording.
The MEA electrode field corresponds with the left overlay plot window "Recording Overlay".
The data traces of the MEA electrodes, selected in the MEA electrode field, and highlighted
in white are displayed in the overlay plot window in different colors.
Recording Overlay
In the "Recording Overlay" window, the heartbeats of the different recording phases of one
single channel are displayed in an overlay plot. See the number of the channel in the upper left
edge of the plot, in this example channel number 33. To select this channel, please select the
channel in the heartbeat window of the "Control Window" on the left side of the "HB Averager"
tab. The channels are color coded, the legends respectively and the number of heartbeats
averaged is stated in brackets. To adapt the y-axis, please use the right drop down menu. You
can display the recording or apply phases only or all phases. Please use the left drop down menu.