Multichannel Systems Cardio2D Manual - Manual (Page 47)

Cardio 2D Software
43
Stimulus Pattern: Rectangle
Modulate the amplitude "Amplitude (mV)" of the ascending and the descend part of the pulse
and the duration "Duration (μs)”, of the rectangle pulse via up-down boxes. Setting the number
of cycles to more than one enables the inter stimulus interval "ISI (μs)" up-down box. Additionally
the “Arrow” button will be enabled.
When using more than one cycle you can click onto the arrow symbol for additional options:
A highlighted parameter field appears to modulate the amplitude and the duration of the
rectangle pulses in relationship to each other, again independently for both parts of the pulse
and for the duration between the ascending and descend arm. The window "Single Pattern"
shows the rectangle pulse in an overlay plot. The lower window "Complete Stimulation Pattern"
shows the combined sequence of all stimulus pulses.