Multichannel Systems Cardio2D Manual - Manual (Page 44)

Cardio2D Manual
40
Building Stimulation Patterns
On the left side of the upper section you can choose the provided default stimulus pattern. Move
the primitive icon via drag and drop into the white field in the middle of the dialog for creating
a user defined stimulation pattern. Add as much primitives as needed. It is possible to change the
sequence of the primitives by drag and drop. For deleting one of the pattern, please drop it into
the bin.
Set Marker Signal
Additionally it is possible to set a marker signal. Open the "Set Marker Signal" dialog by clicking
the check box "Set Marker" in the window for parameter settings.
Click the check box "Set Marker" and click "Repeat" if you want to repeat the marker signal at
each cycle of the stimulation pattern. Adjust the "Offset" in μs and the "Duration" in μs of the
marker signal via the up-down boxes. The orange colored marker signal will be displayed in the
window for the "Complete Stimulus Pattern".