HP DS20L - Manual (Page 99)

SRM Console A-11
A.4.2 Show Device
The show device command displays status for devices and controllers in
the system: SCSI and MSCP devices, and the network.
Syntax: show device [controller_name]
controller_name The controller name or abbreviation. When abbreviations
or wildcards are used, all controllers that match the type
are displayed. If no name is given, the display is a list of all
devices and controllers in the system.
Example A– 2 Show Device Command
P00>>> show device
dkb0.0.0.5.0 DKB0 COMPAQ BF01865222 B004
dqb0.0.1.16.0 DQB0 SAMSUNG CD-ROM SN-124 q008
eia0.0.0.3.1 EIA0 00-02-56-00-08-7A
eib0.0.0.4.0 EIB0 00-02-56-00-08-79
pka0.7.0.3.0 PKA0 SCSI Bus ID 7
pkb0.7.0.5.0 PKB0 SCSI Bus ID 7
P00>>> b
An example of a device name might be dka200.2.0.7.1. Table A-4 shows the
interpretation of this device name.