HP DS20L - Manual (Page 97)

SRM Console A-9
A.4 Show Commands
Several commands are used to display the system configuration: show config,
show device, show hwrpb, show ide, show memory, show pal, show power,
and show version.
A.4.1 Show Config
The show config command displays a list of devices found on the system
interconnect and I/O buses. This is the configuration at the most recent
initialization.
Syntax: show config
Example A– 1 Show Config Command
P00>>> sh config
hp AlphaServer DS20L 833 MHz
SRM Console: V5.9-16
PALcode: OpenVMS PALcode V1.90-71, Tru64 UNIX PALcode V1.86-68
Processors
CPU 0 Alpha 21264B-4 833 MHz (EV68B pass 2.2)SROM Revision: V2.5.2.2.32
Bcache size: 4 MB
CPU 1 Alpha 21264B-4 833 MHz (EV68B pass 2.2)SROM Revision: V2.5.2.2.32
Bcache size: 4 MB
Core Logic
Cchip DECchip 21272-CA Rev 2.1
Dchip DECchip 21272-DA Rev 2.0
Pchip 0 DECchip 21272-EA Rev 2.2
Pchip 1 DECchip 21272-EA Rev 2.2
TIG Rev 4.15
Arbiter Rev 2.8 (0x1)
Power EPLD Rev 9
Reset EPLD Rev 1
MEMORY
Array # Size Base Addr
------- ---------- ---------
0 256 MB 000000000
Total Bad Pages = 0
Total Good Memory = 256 MBytes
PCI Hose 00