HP DS20L - Manual (Page 138)

A-50 AlphaServer DS20L User’s Guide
A.20.6 ew*0_mode
Sets an Ethernet controller to run an AUI, ThinWire, or twisted-pair
Ethernet network. The default is auto-sense. For the fast setting, the
device defaults to fast.
Syntax: set ew*0_mode value
where value can be:
aui Device type is AUI.
bnc Device type is ThinWire.
fast Device type is fast 100BaseT.
fastfd Device type is fast full duplex 100BaseT.
full Device type is full duplex twisted-pair.
twisted-pair Device type is full duplex twisted-pair.
A.20.7 ew*0_protocols
Enables network protocols for booting and other functions.
Syntax: set ew*0_protocols protocol_value
where protocol_value can be:
bootp Sets the network protocol to bootp, the setting typically
used with the Tru64 UNIX operating system.