HP DS20L - Manual (Page 122)

A-34 AlphaServer DS20L User’s Guide
A.11.1 Resetting the Password
If you have forgotten the current password, clear the password as follows:
From the Local Console Terminal
1. Enter the login command: >>> login
2. At the Enter Password: prompt, press the Halt button, then press the Return
key. The password is now cleared and the console cannot be put into secure
mode unless a new password is set.
A.12 Stopping and Starting CPU
The halt (or stop) command stops program execution on a CPU that is
still running a booted program.
Syntax: halt (or stop) 0
where 0 is the number of the CPU (0 or 1) to halt.